Search found 794 matches

by TmEE
Sat Jan 15, 2022 6:52 am
Forum: NES Hardware and Flash Equipment
Topic: Help to program 16 bit EPROMs on a 8 bit programmer
Replies: 5
Views: 257

Re: Help to program 16 bit EPROMs on a 8 bit programmer

Ok, that prevents this idea...

But you can still program the chip one half at a time. Erase turns zeros into ones, and programming operation turn a one back to zero... so you can tie one byte high, while you program the other and do things in two passes.
by TmEE
Sat Jan 15, 2022 2:14 am
Forum: NES Hardware and Flash Equipment
Topic: Help to program 16 bit EPROMs on a 8 bit programmer
Replies: 5
Views: 257

Re: Help to program 16 bit EPROMs on a 8 bit programmer

Usually there's a byte mode on 16bit EPROMs, that will allow you to read/write everything with only 8 bit databus.
by TmEE
Tue Dec 28, 2021 3:20 pm
Forum: General Stuff
Topic: Back!
Replies: 29
Views: 2717

Re: Back!

Yes, this site is no longer usable from older browsers.
by TmEE
Sat Dec 25, 2021 3:20 am
Forum: NES Hardware and Flash Equipment
Topic: Horizontal line glitch in the lower left corner
Replies: 6
Views: 4743

Re: Horizontal line glitch in the lower left corner

You need to feed clock to CPU and PPU through series capacitors instead of direct connection. I made 21 and 26MHz oscillators for PAL and NTSC support on one NES I have and it misbehaved until I had used those capacitors on the clock inputs of both PPU and CPU.
by TmEE
Mon Dec 13, 2021 9:04 am
Forum: NESdev International
Topic: Suomenkielinen NESDev-yhteisö (Finnish)
Replies: 6
Views: 36856

Re: Suomenkielinen NESDev-yhteisö (Finnish)

not Viru Valge, but Saku Originaal LOL
by TmEE
Thu Dec 09, 2021 2:23 am
Forum: Test Forum
Topic: A test post
Replies: 10
Views: 1069

Re: A test post

But this one is an abnormal test message ! :mrgreen:
by TmEE
Sun Dec 05, 2021 9:36 pm
Forum: NESdev
Topic: PPU Book
Replies: 8
Views: 608

Re: PPU Book

This was a nice read, thänk you very much for making it ~

I have done a burn method to extract silicon too, but I have placed the chip in my fireplace, away from flames. It heats more gradually and more gently, and chips I have extracted have been without defects.
by TmEE
Sat Dec 04, 2021 3:12 pm
Forum: General Stuff
Topic: Back!
Replies: 29
Views: 2717

Re: Back!

It has been so long, I am happy this place has returned ~
by TmEE
Tue Jun 29, 2021 6:32 am
Forum: NES Music
Topic: Capturing YM2413 patches from Yamaha PSS-140 for potential use with VRC7
Replies: 22
Views: 2309

Re: Capturing YM2413 patches from Yamaha PSS-140 for potential use with VRC7

When I was active in MD music stuff a decade ago, I remember there were bigass collections of instrument files for YM2612, extracted from VGMs with a tool which name I currently don't recall. I believe they were by Shiru, who quit the MD scene a while ago and made everything related unavailable from...
by TmEE
Sun Jun 27, 2021 2:12 pm
Forum: General Stuff
Topic: Stop byuu/near
Replies: 36
Views: 5290

Re: Stop byuu/near

That is upsetting...
by TmEE
Fri Jun 18, 2021 5:56 am
Forum: NES Hardware and Flash Equipment
Topic: Clone cpu's that don't have duty cycles swapped?
Replies: 10
Views: 2439

Re: Clone cpu's that don't have duty cycles swapped?

Wiki list should be updated then, it says just NP would have that feature but seems NP1 would be it then. NPB is listed as having 21/26MHz (which probably ties to PAL/NTSC too) select in addition to 50/60 select. I am aware of the clock differences etc. My favorite famiclone is a glob top, which has...
by TmEE
Fri Jun 18, 2021 2:10 am
Forum: NES Hardware and Flash Equipment
Topic: Clone cpu's that don't have duty cycles swapped?
Replies: 10
Views: 2439

Re: Clone cpu's that don't have duty cycles swapped?

I got really excited about the 50/60Hz support on TA-02NP PPU, since I have it and I proceeded to do the necessary mods. The clone I have with that CPU actually connects pins 15,16 and 17 together and runs them to a VCC/GND spot but I separated them all and added a switch to control things individua...
by TmEE
Mon Jun 07, 2021 12:19 pm
Forum: General Stuff
Topic: Becoming an FPGA Engineer
Replies: 48
Views: 10397

Re: Becoming an FPGA Engineer

You'll probably want to create a dedicated reset signal for your devboard. Many pirate carts use a diode+capacitor on M1 (I think it was that, or maybe it was A0) signal to create it.
by TmEE
Wed Jun 02, 2021 2:50 pm
Forum: Other Retro Dev
Topic: Help with CD drive not spinning
Replies: 16
Views: 3196

Re: Help with CD drive not spinning

I have not seen a drive with actually invisible laser beam on anything modern (1990+), all show a dull red spot visible through a CD's top surface. Perhaps some early drives have deep infrared (or a much narrower spectrum) laser which beam will actually be invisible.
by TmEE
Wed Jun 02, 2021 2:36 pm
Forum: Other Retro Dev
Topic: Help with CD drive not spinning
Replies: 16
Views: 3196

Re: Help with CD drive not spinning

On that replacement laser there will be a shorted pad somewhere on PCB or flex that connects to the laser. That pad is laser diode power supply and it is shorted to prevent ESD damage to the diode during handling (these lasers are very fragile) and will have to be unshorted for the new assembly to f...