nesdev.org

SHVC-3J3M-01

I just ordered another 24 chips and pcbs, I hope to have all of them assembled by the end of the week. I could test one and send it to you at my cost so you can rule out everything but your programmer?

This, we already knew. Sorry.

http://forums.no-intro.org/viewtopic.ph ... 41&start=0

If I lived closer, I would offer to swing by to try my programmer, and/or my tested TSOPs.. But alas, a 6 hour drive in each direction is a little much for that..

Well, this particular set of CADs was made by me. However there really is only one way to do a Willem to Mask ROM/TSOP adapter, so they are all inherently the same. Routing, spacing, and labeling will obviously differ as there are thousands of ways to make a round wheel, but in the end they are all ...

Okay! I edited my design to include larger holes, so more sockets and headers should fit better then my original CAD. http://www.retrohacker.info/pcb-cads/WillemSNESAdapter.png Here is a link directly to the CAD files: http://www.retrohacker.info/pcb-cads/WillemSNESAdapter.zip Laen's PCB service loc...

I had some family issues to deal with last night, so I did not get a chance to work on it. I intend on reworking it and posting it sometime today. I know that my adapter works fine for Type II boards, I have never owned a Type I, so I cannot speak for those, but I do not see why it wouldnt if the ju...

It bears an uncanny resemblance to mine :wink: 6 eprom 27c801 + TSOP 29f032 (32mb) Hirom. I use a simple switch from 32 MB to 48MB. Tales of Phantasia (French version) 2 TSOP 29f032, donor PCB Tales of Phantasia (J) Kogami! I am glad to see that you are here as well.. I have gathered alot of my kno...

I dont resell my carts, nor do I intend on ever doing that. I buy original japanese games, and replace the roms with english translations for my own use. The only cart I have made that is no longer in my possession was given to a friend of mine as a gift. I understand that some cartmodders do that, ...

Oh right, didnt AMD/Spansion parts need that, but ST parts didnt? I seem to recall reading that somewhere.

I am editing my design for some larger drillsizes. Once that is done, I will post my final version on here.

the picture sometimes loads for me, sometimes not. It is on a Japan webhost, so perhaps that may have something to do with it.

You can right click on the picture, and either copy image or click "view image"

That Japanese fellow in the other thread posted some pictures of his work, and it looks like they use Type-I adapters from buyicnow. I notice that he has a jumper on the header on the end in all of his photos, for example: http://slpcat.web.fc2.com/CIMG6584.JPG Perhaps that is necessary to get them ...

slpcat: you have some great work there, at some point, I need to go back and work on my 27c801 32mbit test setup, as its not working properly right now, and I may just use your photos there for reference.

I am looking through my email now. I made the CAD files at work so I may only have them there, in which case I will have to wait until tomorrow to post them. However, If I have a copy at home, I will post it this evening. However in the meantime, this is the link to the PCB fabrication that I mentio...