nesdev.org

CE to CHR /A13, OE to CHR /RD, all other pins normal (D0 to D0, A12 to A12 etc etc etc..) I assume this is the bend up pin mode? And this PRG is giving me fits, I have no freaking clue Is it documented anywhere more simple? Say like "Bend up pin 24 and 2, place wire from pin 24 to hole 2"...

CE to CHR /A13, OE to CHR /RD, all other pins normal (D0 to D0, A12 to A12 etc etc etc..) I assume this is the bend up pin mode? And this PRG is giving me fits, I have no freaking clue Is it documented anywhere more simple? Say like "Bend up pin 24 and 2, place wire from pin 24 to hole 2"...

sorry, image didnt show up on last one

http://bootgod.dyndns.org:7777/imagegen.php?ImageID=6757&ImageType=large According to Kevtris, the CIRAM A10 is on the image, the bottom of the mmc3 chip, 2nd from the right, correct? I do not see this leading anywhere on the front, and you turn it over and it does not lead anywhere either? htt...

AWESOME, I may have to put this on some carts. To make a TKROM into TKSROM you just need to rewire CIRAM A10. Cut the CIRAM A10 wire that connects the mmc3 pin 10 to nes connector pin 22. Then solder a wire from nes connector pin 22 to mmc3 pin 12 (chr a17). You may have to cut the chr a17 trace th...

AWESOME, I may have to put this on some carts. To make a TKROM into TKSROM you just need to rewire CIRAM A10. Cut the CIRAM A10 wire that connects the mmc3 pin 10 to nes connector pin 22. Then solder a wire from nes connector pin 22 to mmc3 pin 12 (chr a17). You may have to cut the chr a17 trace th...

sdm wrote:CE to CHR /A13, OE to CHR /RD, all other pins normal (D0 to D0, A12 to A12 etc etc etc..)

Thanks...now I just have to somehow figure out the PRG lol. Im confused looking at it

How would the CHR rewiring be? Same as the other ones, like SLROM etc? Im trying to make a Just Breed cart.

Great work Mott! =) Any chance of you ever hacking the pirate game, Super Mario World for NES? Thanks!

I have a copy of gem fire that I am trying to create a just breed out of.

I was looking at this list here: http://www.nesdev.com/NES%20EPROM%20Conversions.txt

but I do not see how to wire this up anywhere....Someone have any clue? Gracias

Is the SGROM wiring the same as SNROM as far as making a cart from a chip?

ok, so i scanned a TKROM board: http://i43.photobucket.com/albums/e371/coinheaven/TKROM.jpg I marked the pin 22 and CHR A17 (i think they are correct), but i am unsure of this step: Cut the CIRAM A10 wire that connects the mmc3 pin 10 to nes connector pin 22 where is pin 10? is the CIRAM A10 wire a...

Did you apply the IPS patch? It should alter the PRG ROM section and the header to "mapper 4". If you only ran the executable, then all it did was shift around CHRROM data. You must apply the IPS patch. Either before or after running the SH_CHR_Patcher program. If you still have trouble l...

I've updated my webpage with the MMC3 version. Feedback/test results would be appreciated for more confirmation that it works properly. It shouldn't have any problems but if it does please tell me. So tell me if you play it and it works perfectly or if it doesn't. Enjoy. http://ninjagaiden4.thegami...

Id love to have Splatter House completed on MMC3, that would be awesome