nesdev.org

is this now 100% complete? I dont wanna play it until its good to go =) Thanks Alot

I have the parallel version of the CopyNES, but I was wondering if using an adapter such as the one below, would work? I assume I would have to use the CopyNES USB software on bunnys site too. Any ideas? Thanks http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10311&cs_id=1031104&...

the PRG side should be correct but I do not think the chr side is (not 100% sure on that though) what happens when you put the game in the console? Nothing. I fiddled around putting it at different angles etc for several minutes...it FINALLY came on, then I turned power off, and back on, and couldn...

peppers wrote:first problem I see is the board is controlled mirroring and your dump is vertical

btw: did you connect the CHR side correctley when replaceing the RAM with a ROM?

How do you mean? I just did a direct solder of the chr and prg slots to the holes. It fired up, only once.

first problem I see is the board is controlled mirroring and your dump is vertical So the donor is set to horizontal only? I switched the mirroring on the rom and it still works great. What about the wiring? I got a direct solder to work actually, 1 time, then I restarted and could never get it wor...

This is from Nestopia:

CRC: 0xE149E0B2
System: NTSC
Board/Chips: SxROM
Mapper: 1
PRG-ROM: 32k, CRC: 0xAF8F7059
CHR-ROM: 64k, CRC: 0x031F9622
W-RAM: 8k
Mirroring: Vertical

Btw, thats the EXACT same donor I used....the file size was 64k chr and 32k prg, I used 27c512 and a 27c256 Why don’t you just say exactly what you are trying to do there are no mmc1 games with a 64k chr in Japan and the prg is always larger than the chr or the same size no game like what you are d...

Btw, thats the EXACT same donor I used....the file size was 64k chr and 32k prg, I used 27c512 and a 27c256

Using this Image of one an example you can see that there are unused through holes next to the PRG ROM If this game had a larger PRG rom those through holes would be filled with pins of a ROM Also the HVC-SNROM board used a CHR RAM Fyi: the mask ROM pinout is the same although since your western an...

Bregalad wrote:NES ROM wiring are exactly identical to Famicom ROM wiring as far I know.

Ahhh...This one is a HVC-SNROM, which accepts 28 pin eproms, so those couldnt be wired the same =( hehe

I have a Famicom game on a HVC-SNROM cart that I wish to reproduce in case it ever goes bad. Are there any wiring diagrams for famicom games anywhere? I noticed there are NES Wiring Diagrams on this site (eprom conversions on nesdev.com part) but I do not see any famicom anywhere. Could someone help...

peppers wrote:how was the sound?

Sound seemed fine

Hello. I am baffled. I am trying to reproduce Free Fall onto a cart. I am using Captain Comic as a donor, and I am also using 2x 27c512 eproms. I have tried 2 different copies of Captain Comic. The Rom was mapper #11, and split into two 64k size files. I did a direct solder in, but on both copies th...

Anyone know of any good sites with SNES cart dev info on it? I remember cherryroms had alot of good info, but it seems to be gone, and I can not find an archive of it. Also, there was one site that showed you have to make dev carts for snes (Like Starfox 2) but cant seem to find that one either! Tha...

Lloyd Gordon wrote:http://www.radioshack.com/product/index ... 2062587&cp

Great, thanks alot!