nesdev.org

Made some more labels and thought I'd share them for those who need them.

Metroid Eris 2012:
PNG Image:

Metroid Cliffhanger:
PNG Image:

Finally had some time to finish this project up and thought I'd post my results. It works perfectly. I used the TSOP 40 to 36 dip adapter and the pinouts line up perfectly. You can leave the top 4 pins disconnected on the pcb. All I had to do was mirror the image on the flash chip and it worked perf...

This should probably be moved to the reproduction section. Was still new to these forums when I made this post. Thanks.

My first attempt failed, so just want to get some more feedback before making a second run. I found this image of the GSU 1 /2 maskrom pinouts in relation to sanni's post: http://s22.postimg.org/x7c11jjgd/so40fx.jpg I then used this pinout for my TSOP 40 to DIP 36 adapter pinout: http://s18.postimg....

qwertymodo wrote:sanni is correct. I've used that exact pinout to build a Kamek's Revenge cart out of a YI donor. Also, this thread probably belongs in the repro section.

Thanks for the confirmation.

Sorry, am still new to these forums. I see the repro section and will post there.

Thanks for the posting. It is a GSU-2, so I'll give it a try and post back.

1. have you used a volt meter to test if you have power going to the sram while the board is not plugged into the system? 2. if power is not going to the sram chip, are your solder joints done correctly? Use desolder braid to remove solder. scrub contacts with 99% isopropyl alcohol. use flux when re...

Been scouring the net for a datasheet or pinout for Super Mario World 2's Toshiba 9548EAI TC5316003CF Mask Rom. I have a Japanese cart that I want to convert to English with a 27C322. I could alternatively use a 29F032 / 29F033 Chip with TSOP to Dip adapter, but still need the original pinout. If an...

Went looking for some Zelda AST labels, but all i could find were pictures of labels for sale. So I made some based off current designs as well as produced an original. Just thought I'd share these in case someone else needs them. Zelda AST Label Based off current designs: PNG Image: http://s14.post...

skaman wrote:https://web.archive.org/web/20070501000 ... slated.doc

Click the March 7, 2007 snapshot to get the document.

Thanks, much appreciated!

Follow this one, just replace the 1st (left) rom. You still have to split it, you just burn the larger first section. http://www.militantgamer.com/Star%20Ocean%20ENG%20translated.doc No clue who the militant gamer is or if he's crazy. I would link to the tutorial on http://www.ultimate-console.fr b...

Absolutely correct. My Setup is not making use of the sync line, although there is a sync available to draw from if one wanted to do a true RBG.

Thought I'd post this for those who like myself went searching for an illustrated guided on how to convert a HiRom 1J3M board into a LoRom board. Granted, this isn't the most practical choice, and a LoRom donor makes way more sense, but when in a pinch, it'll do! This information can be readily sour...

Answered my own question.

220uf 6.3v caps on the Red and Blue lines . . . . doh!
Works like a charm.

I've successfully completed a SuperCIC mod, and everything worked correctly. I then added an RBG out mod which I have done before. The SNES is an SHVC-CPU-01 with the BA6592F chip. I've run red from pin 1 of the BA6592F, Blue from pin 24 of the BA6592F chip and Green from pin 23. I've alternately tr...