how to burn 8 mbit rom to 32 mbit eprom
Moderators: B00daW, Moderators
Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
-
- Posts: 12
- Joined: Wed Feb 26, 2020 2:55 pm
how to burn 8 mbit rom to 32 mbit eprom
Hi, i have question like in topic. I'm will try to find information about burning 8 mbit rom (zelda in this case) to 32 mbit eprom (27c322).
Re: how to burn 8 mbit rom to 32 mbit eprom
The NES and Super NES use an 8-bit data bus. The 27C322 EPROM, by contrast, is designed for a 16-bit data bus. I don't know what board you're using, or whether or not it has a multiplexer, but you might need to follow each byte of data with a byte of $FF so that the other 16 bits are occupied. This gives a 16 Mbit (2 MiB) file. Double it up (the same file twice in a row) to produce the 32 Mbit file to record on the EPROM.
Some circuit boards are specifically designed for connecting a 16-bit EPROM to a computer with an 8-bit data bus. They contain a set of eight 2:1 multiplexers to select the low or high 8 bits of each 16-bit word that the EPROM outputs. For these, you just write the whole ROM four times in a row.
Some circuit boards are specifically designed for connecting a 16-bit EPROM to a computer with an 8-bit data bus. They contain a set of eight 2:1 multiplexers to select the low or high 8 bits of each 16-bit word that the EPROM outputs. For these, you just write the whole ROM four times in a row.
-
- Posts: 12
- Joined: Wed Feb 26, 2020 2:55 pm
Re: how to burn 8 mbit rom to 32 mbit eprom
Hi, thanks for reply.
I was make board adapter nad use a donor cartridge, the adapter is from this site CLICK this is connection board for this
Im try to burn rom first time and i have willem programmer with adapter for 27C322. Can you tell me how to prepare rom in good way ?
another question is what kind of file i should burn ? *smc *sfc ? my rom oryginally is smc. Willem can programm it with 16 bit mode (word mode).
I was try to burn my file today but i have error at end of burning (0xFF)
I was make board adapter nad use a donor cartridge, the adapter is from this site CLICK this is connection board for this
Im try to burn rom first time and i have willem programmer with adapter for 27C322. Can you tell me how to prepare rom in good way ?
another question is what kind of file i should burn ? *smc *sfc ? my rom oryginally is smc. Willem can programm it with 16 bit mode (word mode).
I was try to burn my file today but i have error at end of burning (0xFF)
-
- Posts: 252
- Joined: Fri Jun 24, 2016 4:20 pm
Re: how to burn 8 mbit rom to 32 mbit eprom
Not sure what your error is, since I don't use a Willem programmer, but your file extension is fine.
That table from my website isn't how to wire the program adapter, it's how to wire the 27C322 to the SNES board after you've programmed it. You want to follow this page instead.
That table from my website isn't how to wire the program adapter, it's how to wire the 27C322 to the SNES board after you've programmed it. You want to follow this page instead.
-
- Posts: 12
- Joined: Wed Feb 26, 2020 2:55 pm
Re: how to burn 8 mbit rom to 32 mbit eprom
Very thanks for reply i'm study Your website for several days, i'm know it's a table for adapter for a donor cartridge and i was make one. All problems what i have is what prepare file with right way and programm EPROM, so i have questions for "Retro game professor"poorstudenthobbyist wrote: ↑Sun Jun 14, 2020 7:00 pm Not sure what your error is, since I don't use a Willem programmer, but your file extension is fine.
That table from my website isn't how to wire the program adapter, it's how to wire the 27C322 to the SNES board after you've programmed it. You want to follow this page instead.
1. does the file i prepared have to have size for fill all space in EPROM ? if yes, what i can do that when my ROM is < 4MB ? eg: Zelda ROM have 1024 kb. I must merge 4 of copies the same file ?
2. i don't quite know what is difference between HIROM and EXHIROM?
Sorry for my English and thanks for Your answer
-
- Posts: 252
- Joined: Fri Jun 24, 2016 4:20 pm
Re: how to burn 8 mbit rom to 32 mbit eprom
1 - no you don't need to fill it up. But it wouldn't hurt anything.
2 - ExHiRom is basically the same as HiROM with some extra logic to control two 4 MB ROMs. If your game is 4 MB or less then you don't need ExHiRom.
I'm far from a professor lol but I'm glad my site could help!
2 - ExHiRom is basically the same as HiROM with some extra logic to control two 4 MB ROMs. If your game is 4 MB or less then you don't need ExHiRom.
I'm far from a professor lol but I'm glad my site could help!
-
- Posts: 12
- Joined: Wed Feb 26, 2020 2:55 pm
Re: how to burn 8 mbit rom to 32 mbit eprom
Thanks for Your reply i will try burn some romspoorstudenthobbyist wrote: ↑Mon Jun 15, 2020 4:30 am 1 - no you don't need to fill it up. But it wouldn't hurt anything.
2 - ExHiRom is basically the same as HiROM with some extra logic to control two 4 MB ROMs. If your game is 4 MB or less then you don't need ExHiRom.
I'm far from a professor lol but I'm glad my site could help!
Re: how to burn 8 mbit rom to 32 mbit eprom
Is it for HiRom or LoRom ?kataklysm101 wrote: ↑Sun Jun 14, 2020 3:03 pm Hi, thanks for reply.
I was make board adapter nad use a donor cartridge, the adapter is from this site CLICK this is connection board for this
Im try to burn rom first time and i have willem programmer with adapter for 27C322. Can you tell me how to prepare rom in good way ?
another question is what kind of file i should burn ? *smc *sfc ? my rom oryginally is smc. Willem can programm it with 16 bit mode (word mode).
I was try to burn my file today but i have error at end of burning (0xFF)
-
- Posts: 252
- Joined: Fri Jun 24, 2016 4:20 pm
Re: how to burn 8 mbit rom to 32 mbit eprom
Both. This table is from the perspective of the original ROM socket. So all the address numbers are the ROM address numbers.
i.e.
ROM A15 goes to CPU A15 on HiROM
ROM A15 goes to CPU BA0 on LoROM
But the A15 pin number is always the same. The connection to the cart connector is just different.
i.e.
ROM A15 goes to CPU A15 on HiROM
ROM A15 goes to CPU BA0 on LoROM
But the A15 pin number is always the same. The connection to the cart connector is just different.
Re: how to burn 8 mbit rom to 32 mbit eprom
What’s meaning « CPU »?poorstudenthobbyist wrote: ↑Tue Jul 07, 2020 6:44 pm Both. This table is from the perspective of the original ROM socket. So all the address numbers are the ROM address numbers.
i.e.
ROM A15 goes to CPU A15 on HiROM
ROM A15 goes to CPU BA0 on LoROM
But the A15 pin number is always the same. The connection to the cart connector is just different.
Cartridge Pin...
Re: how to burn 8 mbit rom to 32 mbit eprom
I unswerving for meKayumba wrote: ↑Sun Apr 25, 2021 12:04 pmWhat’s meaning « CPU »?poorstudenthobbyist wrote: ↑Tue Jul 07, 2020 6:44 pm Both. This table is from the perspective of the original ROM socket. So all the address numbers are the ROM address numbers.
i.e.
ROM A15 goes to CPU A15 on HiROM
ROM A15 goes to CPU BA0 on LoROM
But the A15 pin number is always the same. The connection to the cart connector is just different.
Cartridge Pin...
CPU = Central Processing Unit