hello guys, i'm here again. I'm trying to recover an original cic from the console. but I got to a copper in there when I measure on the multimeter pin 3 and 4 are the same is it really like that or is it spoiled? people cut pin 4 to unlock ends up breaking the pin =(
CIC nes american
Moderator: Moderators
- TmEE
- Posts: 960
- Joined: Wed Feb 13, 2008 9:10 am
- Location: Norway (50 and 60Hz compatible :P)
- Contact:
Re: CIC nes american
This does not look recoverable, photos are not very good but it looks like there isn't much to solder onto left and the damage is nearing silicon too.
Re: CIC nes american
Have you tried to "sand" it using a micro "esmeril"?
I did in some ICs here with good results.
Some pictures: Good luck, and please, share your results.
I did in some ICs here with good results.
Some pictures: Good luck, and please, share your results.
- krzysiobal
- Posts: 1037
- Joined: Sun Jun 12, 2011 12:06 pm
- Location: Poland
- Contact:
Re: CIC nes american
Me too: