How to fix those famiclone controllers

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderator: Moderators

Post Reply
User avatar
ouso1999
Posts: 126
Joined: Sun Jun 12, 2011 10:04 am
Location: Cairo , Egypt
Contact:

How to fix those famiclone controllers

Post by ouso1999 »

Hi guys
I need to fix those controllers and make them work properly . I remember I used to use them but I cut the wires off because I wanted them for some reason

So I want to know how . Is connecting each end with a color to the other color will make it work?

Image

Image

Image

Have a nice day
______________________________________
Born to amuse, to inspire, to delight
Here one day
Gone one night
Like a sunset
Dying with the rising of the moon
Gone too soon


I missed u dad
_______________________________________
OmDRetro
Posts: 20
Joined: Sat Mar 25, 2023 7:54 pm

Re: How to fix those famiclone controllers

Post by OmDRetro »

You can refer to the generic FC controller named "HB-JOY".

Check the pinouts(may need to open image as new tab for a good view):

Image

The bottom pins are paired. This means pins 6 + 7 (+5 Volt pins) & pins 8 + 9 (GND pins) are joined in a famiclone.

Pin 1: None
Pin 2: D0
Pin 3: OUT0
Pin 4: CLK
Pin 5: None
Pin 6: +5V
Pin 7: +5V
Pin 8: GND
Pin 9: GND
Post Reply