NESRGB v2 help

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderator: Moderators

Post Reply
mmz16x
Posts: 29
Joined: Thu May 28, 2009 12:17 pm

NESRGB v2 help

Post by mmz16x »

Hello,

I Bought a NESRGB v2 and just now got around to installing it the v4 I bought more recently installed and worked first time no issue.

Although the v2 I just installed into a AV Famicom and all tested points show continuity both on the IC Socket supplied with the kit and on the IC Socket installed to the NESRGB except for the below points on the NESRGB v2

DP0 - DP7 (no continuity)

EXT0 - EXT3 (All Tied Together)

I have attached and markered the pins affected off the NESRGB v2

Please note I also did ACE Mod for audio to the AV Famicom motherboard and the NESRGB along with fresh caps and a new 78S05 Voltage Regulator supplying 2 amps over the stock 750 mili-amps

Note 2 also installed Voultars QSB to the AV Famicom motherboard and NESRGB and all solder points show continuity

Note 3 the supplied AV Famicom adapter board also show all continuity aswell.


Any ideas to this?
Attachments
received_5927374250650626.jpeg
received_2721814341288703.jpeg
received_1324238244802575.jpeg
received_612464153753990.jpeg
received_212078991441097.jpeg
Post Reply