Seeking SNES Back Plate 3D Model DC Power Jack 11X9 MM Hole

A place where you can keep others updated about your SNES-related projects through screenshots, videos or information in general.

Moderator: Moderators

Post Reply
Rhine_Labs
Posts: 2
Joined: Tue Jan 09, 2024 8:29 pm

Seeking SNES Back Plate 3D Model DC Power Jack 11X9 MM Hole

Post by Rhine_Labs »

Hello,

Does anyone have an Accurate 3d model of a SNES Back plate that has a Rectangular hole so you can replace the DC Jack with a Standard 11X9mm one. I found a model but none of the holes for line up and really thin.

I have searched all the usual 3d print model sites, thingiverse, printabels, etc.

Image

Thanks
detonation
Posts: 2
Joined: Mon Jan 15, 2024 11:41 am

Re: Seeking SNES Back Plate 3D Model DC Power Jack 11X9 MM Hole

Post by detonation »

This may not help you but I have a blank one if you want to try any customize your own.
SNES backplate.zip
(10.61 KiB) Downloaded 5 times
What about wiring in a USB-C bulkhead instead? You can use power supplies you have laying around for you phone.
Rhine_Labs
Posts: 2
Joined: Tue Jan 09, 2024 8:29 pm

Re: Seeking SNES Back Plate 3D Model DC Power Jack 11X9 MM Hole

Post by Rhine_Labs »

Thanks, Ill give it a try

I am not that good yet at modifying stl's or 3d modeling.
Post Reply