PCB class: Nintendo HVC-SXROM-01
U1 PRG-ROM: ATH-87-0 PRG, 0x20000 byte ROM, CRC32: 0xd1e50064
U2 CHR-RAM: LH5168FB-10L, 0x2000 byte RAM
U4 W-RAM: LH52A256-10LL, 0x8000 byte RAM (banked)
high resolution and other sides scan
http://www1.axfc.net/u/3179252.zip
nescartdb にはどうやって登録するの?
絵描衛門 / Dezaemon PCB scan
Moderator: Moderators
Re: 絵描衛門 / Dezaemon PCB scan
A third SXROM game ? Cool, I always tought there were only 2.
Does it use all 32k of SRAM ?
As far I know both Final Fantasy I & II and Best Play Pro Yakyuu Special used only 16k (both are multicard with 2 games on them I think, please tell me if I'm wrong).
Does it use all 32k of SRAM ?
As far I know both Final Fantasy I & II and Best Play Pro Yakyuu Special used only 16k (both are multicard with 2 games on them I think, please tell me if I'm wrong).
Re: 絵描衛門 / Dezaemon PCB scan
デザエモンはゲームを作るソフトだ。自分はこのソフトを使ったことがないが、ユーザーに聞いたことがある。
このソフトでは4つのステージを作ることができる。4つのステージのデータは RAM の page 0,1,2,3 が Stage 1,2,3,4 になるというので、おそらくSRAM全てを使用している可能性が高い。
このユーザーは絵描衛門がエミュレータで正常に動かないと言っている。
http://dezagarou.ame-zaiku.com/html/other/ezaemon.html
このソフトでは4つのステージを作ることができる。4つのステージのデータは RAM の page 0,1,2,3 が Stage 1,2,3,4 になるというので、おそらくSRAM全てを使用している可能性が高い。
このユーザーは絵描衛門がエミュレータで正常に動かないと言っている。
http://dezagarou.ame-zaiku.com/html/other/ezaemon.html
ちなみに、絵描衛門はエミュレーターでは正常に作動しません。
エディットモードで保存する事が出来ず、フリーズしてしまいます。
Re: 絵描衛門 / Dezaemon PCB scan
So basically as far as I can understand you, this game uses all 4 SRAM banks to allow the user to edit 4 different stages ? Sounds rather unique for a NES/FC game !
It seems current emus would emulate SNROM instead (with no SRAM banking) and crash on edit mode, as the emu refuses to switch RAM banks ?
I also see that the PRG-ROM is 28-pin so it means its size is 128kb or less, so they definitely used this board for SRAM banking solely.
It seems current emus would emulate SNROM instead (with no SRAM banking) and crash on edit mode, as the emu refuses to switch RAM banks ?
I also see that the PRG-ROM is 28-pin so it means its size is 128kb or less, so they definitely used this board for SRAM banking solely.
Re: 絵描衛門 / Dezaemon PCB scan
右上隅の[Register]をクリックして、そこでログイン、パスワード、メールの情報を入れてください。すみませんがそれ以上解りません。naruko wrote: nescartdb にはどうやって登録するの?
Naruko is asking how to register and submit to bootgod. I have never done that so I don't really know.
Re: 絵描衛門 / Dezaemon PCB scan
As far as I can remember you have to talk to Bootgod directly, there is no automatic process for registering. Send him a PM.
Re: 絵描衛門 / Dezaemon PCB scan
@naruko: I've documented the 32k SRAM in MESS. thanks a lot!
I'm not fully sure how to verify that the saving/loading on different banks work (I hate dezaemon editor ), but FF1+2 works fine in MESS so I would expect this to work too...
I'm not fully sure how to verify that the saving/loading on different banks work (I hate dezaemon editor ), but FF1+2 works fine in MESS so I would expect this to work too...