Yes, because the Famicom in Japan also called the cartridges as "Cassettes". By the way, Master System, Mega Drive, MSX and Famicom cartridges have the exact size as a Compact Cassette case.zxbdragon wrote:In China:
Susoft 5a clone?
Moderators: B00daW, Moderators
Forum rules
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
1. NO BLATANT PIRACY. This includes reproducing homebrew less than 10 years old, with the exception of free software.
2. No advertising your reproductions, with the exception of free software.
3. Be nice. See RFC 1855 if you aren't sure what this means.
- l_oliveira
- Posts: 409
- Joined: Wed Jul 13, 2011 6:51 am
- Location: Brasilia, Brazil
Re: Susoft 5a clone?
Re: Susoft 5a clone?
Which mapper is this?zxbdragon wrote:untitled.av.
Re: Susoft 5a clone?
not have ines mapper number.Joe wrote:Which mapper is this?zxbdragon wrote:untitled.av.
this game using unif
UNL-TH2131-1
Vrc2/4 + IRQ
Re: Susoft 5a clone?
Which emulators can run UNL-TH2131-1?
Re: Susoft 5a clone?
Nice!! TH2131-1 is written on the PCB!!Joe wrote:Which emulators can run UNL-TH2131-1?
Re: Susoft 5a clone?
CG Real machine like?Fisher wrote:Nice!! TH2131-1 is written on the PCB!!Joe wrote:Which emulators can run UNL-TH2131-1?
Re: Susoft 5a clone?
Not yet,MAPPER information confirmation......Fisher wrote:Nice!! TH2131-1 is written on the PCB!!Joe wrote:Which emulators can run UNL-TH2131-1?
future:
virtuanes ex
virtuanes plus
fceux
nestopia plus!
Re: Susoft 5a clone?
It gets a little bugged on the top of the text, but not this much.zxbdragon wrote:CG Real machine like?
I should have made a video of the real thing before disassemble...
Maybe I should reassemble and make a video before the flash rom transplant.
Re: Susoft 5a clone?
What questions do you have? I think I can answer.zxbdragon wrote:Not yet,MAPPER information confirmation......
Registers: $F000, $F001, $F003 (mask: $F003)
$F000: Disables IRQ, halts counters, clears low counter.
$F001: Enables IRQ, starts counters. If the high counter contains 0, an IRQ will trigger immediately.
$F003: Loads high counter with a new value.
Code: Select all
7 bit 0
---------
CCCC ....
||||
++++------ New value of high counter
Re: Susoft 5a clone?
That means that the interrupts generated by this will fire 2048 to 4095 cycles earlier than the corresponding FME-7 IRQ would have?
Re: Susoft 5a clone?
If I'm understanding everything correctly, using this IRQ the easy way (setting the counter while it's disabled and then enabling it) will trigger the IRQ between 1 and 4096 cycles sooner than a FME-7 would. It will act like a FME-7 that only lets you set the highest four bits, and triggers when it reaches 0 instead of when it wraps around.
The IRQ won't trigger immediately when the high counter reaches 0; the IRQ line is only pulled low when the high counter is 0 and the low counter has a value from 0 to 2047.
The IRQ won't trigger immediately when the high counter reaches 0; the IRQ line is only pulled low when the high counter is 0 and the low counter has a value from 0 to 2047.
Re: Susoft 5a clone?
Hey zxbdragon, should I ask where did you get this ROM?
I would like to get it too and take a look, to make sure my dumping process is error free.
If you're interested, I can try to reassemble the cartridge and make some videos, maybe this can help document a little more this mapper.
By the way, I think I found a small bug on Nes Cart db search function: If I search chip type VRC2, I get only 2 results, but I know there are more than these already on the site's db. Wai wai world and Goemon 2 are some examples. Should they appear on the search for VRC2?
Thanks again for everybody!!
I would like to get it too and take a look, to make sure my dumping process is error free.
If you're interested, I can try to reassemble the cartridge and make some videos, maybe this can help document a little more this mapper.
By the way, I think I found a small bug on Nes Cart db search function: If I search chip type VRC2, I get only 2 results, but I know there are more than these already on the site's db. Wai wai world and Goemon 2 are some examples. Should they appear on the search for VRC2?
Thanks again for everybody!!
- l_oliveira
- Posts: 409
- Joined: Wed Jul 13, 2011 6:51 am
- Location: Brasilia, Brazil
Re: Susoft 5a clone?
try "KONAMI-VRC-2" at "PCB, Class, Mapper" instead.Fisher wrote:Hey zxbdragon, should I ask where did you get this ROM?
I would like to get it too and take a look, to make sure my dumping process is error free.
If you're interested, I can try to reassemble the cartridge and make some videos, maybe this can help document a little more this mapper.
By the way, I think I found a small bug on Nes Cart db search function: If I search chip type VRC2, I get only 2 results, but I know there are more than these already on the site's db. Wai wai world and Goemon 2 are some examples. Should they appear on the search for VRC2?
Thanks again for everybody!!
Re: Susoft 5a clone?
Can I see the source code?zxbdragon wrote:virtuanes by temryu.rar
Fisher wrote:Hey zxbdragon, should I ask where did you get this ROM?
I would like to get it too and take a look, to make sure my dumping process is error free.
...This is the ROM you dumped. (At least, the PRG is. I think you haven't gotten a good dump of the CHR yet.)Batman (j) [p1].unf wrote:Dump by Fisher,Emu by temryu