Repro snes Cartridge

Moderator: Moderators

Post Reply
Luckaosts
Posts: 3
Joined: Mon Nov 02, 2020 8:02 am

Repro snes Cartridge

Post by Luckaosts »

hello, i'm new to the group and i'm having difficulties to elaborate my rescheduled snes projects, i'm currently using memory 29l3211, but i can't find any pcb project to make the games, could someone help me?
lidnariq
Posts: 10705
Joined: Sun Apr 13, 2008 11:12 am
Location: Seattle

Re: Repro snes Cartridge

Post by lidnariq »

Don't use a low-voltage part like that one (29L) without adding voltage translation.

1- the SNES won't reliably receive 3.3V as logic high
2- attaching a 3.3V part without voltage translation will damage the 5V SNES and the ROM.

For down-translation, from the address and control lines to the ROM, you can use almost anything - voltage dividers, voltage clamps like the GTL2000, active translation like the 7416245. For up-translation, from the ROM's data bus to the SNES, you need some active translation.
Luckaosts
Posts: 3
Joined: Mon Nov 02, 2020 8:02 am

Re: Repro snes Cartridge

Post by Luckaosts »

i have used an original pcb adapter, it has a 3.3v voltage regulator and a 104 capacitor, i wanted to find a pcb project that could do both lo-rom and hi-rom in the same way
lidnariq
Posts: 10705
Joined: Sun Apr 13, 2008 11:12 am
Location: Seattle

Re: Repro snes Cartridge

Post by lidnariq »

Yeah, don't use those without extra parts for voltage translation. They're bad for the ROM on the adapter board and bad for the SNES.
Luckaosts
Posts: 3
Joined: Mon Nov 02, 2020 8:02 am

Re: Repro snes Cartridge

Post by Luckaosts »

so i'm brazilian and i don't have much knowledge of making a snes pcb project from scratch, i would like to know if anyone has a project that they want to share
lidnariq
Posts: 10705
Joined: Sun Apr 13, 2008 11:12 am
Location: Seattle

Re: Repro snes Cartridge

Post by lidnariq »

Here's another user's verbose writeup: https://thepoorstudenthobbyist.com/2017 ... cartridge/
Post Reply