The demo Overdrive 2 by Titan is made for 50 Hz Mega Drive systems. It is not compatible with Genesis systems or Japanese Mega Drive systems, and there are reports that the debug mode on which it relies doesn't even work correctly on all European console revisions. Because I can't afford to import a full 50 Hz stack, I had to refer to a video while making the following breakdown of how the effects might be replicated elsewhere
0:03 film-like pacing
0:33 Cube Quest/Iridion 3D-like background loop
1:00 Fuzz is HDMA on horizontal scroll
1:06 subtractive color math
1:14 pushing 16x16-pixel sprite chunks together
1:27 average color math (Donkey Kong Country does similar effects), with the texture pattern gradually clearing up over the scene. Not sure how the clouds in the far layer were built
1:59 Tunnel of squares curving in all four directions. Do whatever Nintendo's X/Lunar Chase does.
2:05 Plan VRAM very carefully for the transition from mode 7 (zooming) with a sprite-based background plane to mode 2 (OPT).
2:15 The logo becomes sprites. The circles aren't mode 7; they're mode 0.
2:26 Checkerboard. I have no idea what's being done here. If there were four layers, HDMA in mode 0 could change HV offset every line, but there are more than four. Perhaps use window to render the frontmost layer once there are more than 4 squares?
2:37 Rendering polygons in planar mode is tough, I'll admit. Fortunately it doesn't start to spin until the checkerboards are out of the way and the maximum vertical area isn't very big, so use of mode 7 for its packed mode might be practical.
2:48 mode 0. color math, pseudo hires... I think
3:09 3D matrix math for that many sprites... now that's tough without any sort of 16x16 multiply. I see a moiré background, and I can't tell know it's done perhaps because of video encoding artifacts.
3:20 This should be fairly easy to do with HDMA to change V offset. It's just a lot of geometry to interpolate every frame. There are shadows, for which a window may help.
3:31 I've seen similar rotating checkerboard effects in Mental Respirator by Phantasy, rendered as one row of tiles per layer and then offsetting that every 8 pixels. It's just that there are too dang many layers.
3:47 fairly obvious additive color math
4:15 no idea how to replicate "broken border" here
4:25 mosaic? SNES does that in hardware
4:30 just do it with mode 7, and renormalize coordinates once it gets far enough in
4:52 also mode 7, though as at 3:20 there's a lot of geometry
5:08 No idea how to make that gyroscope efficient, other than taking advantage of it being small.
5:19 no idea how to do this blobs that also appears at 0:42 in Farbrausch's fr-018: aGb
5:30 The interlace lines give a bit of clue about the plasma, and the scene is subtractively blended on
5:35 ooh, a mode 2 plasma
5:46 getting this perspective-correct might be tough
6:08 oh crap, full screen 6DOF 3D, do we need a Super FX now? I can tell it is using OPT for the sky box just like Star Fox
6:35 Don't be fooled. This isn't a mode 7 floor; it tilts.
6:45 End of demo. What remains is credits.
Overdrive 2 scene by scene
Re: Overdrive 2 scene by scene
Since this is a PAL thing, you may not need to if you wish to accomplish NTSC compatibility.
The SNES has an overscan mode that gives it 15 more scanlines, though that may not be enough of a border.
Last edited by Nikku4211 on Wed May 05, 2021 4:47 pm, edited 1 time in total.
I have an ASD, so empathy is not natural for me. If I hurt you, I apologise.
Re: Overdrive 2 scene by scene
You don't need to render all of it to planar. Use the BG mode that uses 8x8 tiles and 8px vertical offset. You can then have a display that is 8x1. Have the renderer optimize horizontal pixel in runs of 8px for an 8x1 tilemap entry instead of writing to a planar tile. You can even have edge/color transitions. Just have a bunch of tiles with two color offsets at varying offset inside the 8x1 slice.
Re: Overdrive 2 scene by scene
I wonder: would this 8x1 tilemap renderer system run faster than rendering to mode 7's chunky tileset format or rendering to mode 7 tilemap using solid colour tiles?turboxray wrote: ↑Sat Jan 23, 2021 1:40 pm You don't need to render all of it to planar. Use the BG mode that uses 8x8 tiles and 8px vertical offset. You can then have a display that is 8x1. Have the renderer optimize horizontal pixel in runs of 8px for an 8x1 tilemap entry instead of writing to a planar tile. You can even have edge/color transitions. Just have a bunch of tiles with two color offsets at varying offset inside the 8x1 slice.
I have an ASD, so empathy is not natural for me. If I hurt you, I apologise.
Re: Overdrive 2 scene by scene
Given the video chips that I've seen to have an unofficial capacity to disable the border, you need to find some way to fool the video chip into forgetting to draw the border
Re: Overdrive 2 scene by scene
Oh, you had a chance to talk to one of the people who coded the demo?
How many of the effects did you guess correctly about how they worked?
I've been thinking about this a lot and I realised one thing about this:
Doing that wouldn't really work that well when your sprite has big transparent areas in its edge.
There seems to be 7-8 visible layers per frame.
Maybe you can do the maths using look-up tables? I'm not an expert at that field, though.
The moire background looks like it can be done with 2 layers of circles.
You sure this isn't a vector streamer that doesn't actually do 3D maths? All the NICCC demos are just vector streamers.
I have an ASD, so empathy is not natural for me. If I hurt you, I apologise.