Help! MMC5 dev cart issue

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderator: Moderators

Post Reply
mightydidz
Posts: 99
Joined: Wed Jan 24, 2018 12:04 pm

Help! MMC5 dev cart issue

Post by mightydidz »

I build myself a MMC5 dev cart to test romhacks and transalation.
I really simple schematic using a 62256 sram and 2x27c801 eeprom.
Jumpers for SL/CL mode but its currently in CL mode.

It not working correctly, I'm having garbled sprites, sometime it freezes, sometime I have to press reset couple of times to have it boot correctly.
Its a plain 72pin cartridge, no adapter. ciram-a10 and ciram-/cs are connected directly to mmc5

I've reflowed the mmc5 couple of times to make sure welds are strongs
Only one side is a bit off, but I'm confided the connections are good.
Here's a picture of the welds and my schematic


Here is a video I made with couples of games showing the problems
https://youtu.be/oPrwiRmezag

If anyone have any hints on what's going on that would help me alot.
Thanks
Attachments
mmc5 test.pdf
(32.73 KiB) Downloaded 121 times
test.jpg
Post Reply