Wrong SNES video

Discussion of hardware and software development for Super NES and Super Famicom. See the SNESdev wiki for more information.

Moderator: Moderators

Forum rules
  • For making cartridges of your Super NES games, see Reproduction.
jcarlos
Posts: 79
Joined: Mon Dec 21, 2020 11:38 pm

Re: Wrong SNES video

Post by jcarlos »

I already replaced both video RAM memories and nothing continues the problem. Thank you
jcarlos
Posts: 79
Joined: Mon Dec 21, 2020 11:38 pm

Re: Wrong SNES video

Post by jcarlos »

What is more likely that the failure is in the PPU1 or the PPU2?
jcarlos
Posts: 79
Joined: Mon Dec 21, 2020 11:38 pm

Re: Wrong SNES video

Post by jcarlos »

And the working RAM of 128K, I have not replaced this, could it be the cause?
jcarlos
Posts: 79
Joined: Mon Dec 21, 2020 11:38 pm

Re: Wrong SNES video

Post by jcarlos »

Here I have the electrical diagram of the snes. It is seen that PPU1 is the one that addresses the video memories and not PPU2.
Attachments
snes_schematic_color.pdf
(724.91 KiB) Downloaded 22 times
User avatar
TmEE
Posts: 960
Joined: Wed Feb 13, 2008 9:10 am
Location: Norway (50 and 60Hz compatible :P)
Contact:

Re: Wrong SNES video

Post by TmEE »

I have one SNES where PPU1 went bad one day all of a sudden and I have heard many other reports of bad PPUs in SNES, so it isn't unlikely that this is the problem especially since VRAM has been changed.
Post Reply