Hi guys
I need to fix those controllers and make them work properly . I remember I used to use them but I cut the wires off because I wanted them for some reason
So I want to know how . Is connecting each end with a color to the other color will make it work?
Have a nice day
How to fix those famiclone controllers
Moderator: Moderators
How to fix those famiclone controllers
______________________________________
Born to amuse, to inspire, to delight
Here one day
Gone one night
Like a sunset
Dying with the rising of the moon
Gone too soon
I missed u dad
Born to amuse, to inspire, to delight
Here one day
Gone one night
Like a sunset
Dying with the rising of the moon
Gone too soon
I missed u dad
_______________________________________
Re: How to fix those famiclone controllers
You can refer to the generic FC controller named "HB-JOY".
Check the pinouts(may need to open image as new tab for a good view):
The bottom pins are paired. This means pins 6 + 7 (+5 Volt pins) & pins 8 + 9 (GND pins) are joined in a famiclone.
Pin 1: None
Pin 2: D0
Pin 3: OUT0
Pin 4: CLK
Pin 5: None
Pin 6: +5V
Pin 7: +5V
Pin 8: GND
Pin 9: GND
Check the pinouts(may need to open image as new tab for a good view):
The bottom pins are paired. This means pins 6 + 7 (+5 Volt pins) & pins 8 + 9 (GND pins) are joined in a famiclone.
Pin 1: None
Pin 2: D0
Pin 3: OUT0
Pin 4: CLK
Pin 5: None
Pin 6: +5V
Pin 7: +5V
Pin 8: GND
Pin 9: GND