Hello,
I Bought a NESRGB v2 and just now got around to installing it the v4 I bought more recently installed and worked first time no issue.
Although the v2 I just installed into a AV Famicom and all tested points show continuity both on the IC Socket supplied with the kit and on the IC Socket installed to the NESRGB except for the below points on the NESRGB v2
DP0 - DP7 (no continuity)
EXT0 - EXT3 (All Tied Together)
I have attached and markered the pins affected off the NESRGB v2
Please note I also did ACE Mod for audio to the AV Famicom motherboard and the NESRGB along with fresh caps and a new 78S05 Voltage Regulator supplying 2 amps over the stock 750 mili-amps
Note 2 also installed Voultars QSB to the AV Famicom motherboard and NESRGB and all solder points show continuity
Note 3 the supplied AV Famicom adapter board also show all continuity aswell.
Any ideas to this?
NESRGB v2 help
Moderator: Moderators