Getting Started(Updated:Jun. '10)

Are you new to 6502, NES, or even programming in general? Post any of your questions here. Remember - the only dumb question is the question that remains unasked.

Moderator: Moderators

User avatar
cpow
NESICIDE developer
Posts: 1097
Joined: Mon Oct 13, 2008 7:55 pm
Location: Minneapolis, MN
Contact:

Post by cpow »

qbradq wrote:That's the right link, but the page is down. You might want to PM cpow, he is the author.
Could someone update the link to NESICIDE please?

www.nesicide.com

Thanks!
mikaelmoizt
Posts: 120
Joined: Sat Apr 12, 2014 12:11 pm
Location: Gothenburg, Sweden

Re: Getting Started(Updated:Jun. '10)

Post by mikaelmoizt »

And if you decide to upgrade ( 8-) )from NESASM3 to asm6 and use Context Editor, this is what your settings might look like. I use f9 for the assembler, f10 for NES Screen Tool, f11 is empty and f12 for fceux. It's a really handy setup.
gettingstartedpic.jpg
I´ve got %01100011 problems but the BITs aint one.
qalle
Posts: 50
Joined: Wed Aug 16, 2017 12:15 am

Re: Getting Started(Updated:Jun. '10)

Post by qalle »

Some links in the first post are broken:
RichieHPS

Re: Getting Started(Updated:Jun. '10)

Post by RichieHPS »

Hi, very interesting. Really useful post. Thank you, I'm new to this business. I hope that I succeed? What advice would you give me? Good luck!
tepples
Posts: 22708
Joined: Sun Sep 19, 2004 11:12 pm
Location: NE Indiana, USA (NTSC)
Contact:

Re: Getting Started(Updated:Jun. '10)

Post by tepples »

Garth
Posts: 246
Joined: Wed Nov 30, 2016 4:45 pm
Location: Southern California
Contact:

Re: Getting Started(Updated:Jun. '10)

Post by Garth »

RichieHPS wrote:Hi, very interesting. Really useful post. Thank you, I'm new
This is a very typical first post for a spammer, and a near guarantee that you are one! On the forums I moderate, when I see this I do a quick search and find the person has left quite a trail of spam, and I ban them and kick them out immediately.
http://WilsonMinesCo.com/ lots of 6502 resources
User avatar
Bregalad
Posts: 8056
Joined: Fri Nov 12, 2004 2:49 pm
Location: Divonne-les-bains, France

Re: Getting Started(Updated:Jun. '10)

Post by Bregalad »

Please just report spam using the report buttong and the mods will remove it, there's no need to answer it.
Useless, lumbering half-wits don't scare us.
Post Reply