Page 1 of 1
Star fox 2 beta help
Posted: Sat Feb 02, 2008 2:53 am
by Nerdy Nick
Ok, today i tried to make a starfox 2 cart... ive done all the soldering but run into a bit off trouble trying to burn the eprom.
I have a willem burner and when burning my 27c0801's it stops at 99% and with an error
ive tried 4 differnet eproms and the same thing happened any ideas?
Re: Star fox 2 beta help
Posted: Tue Feb 05, 2008 8:57 am
by tepples
Nerdy Nick wrote:I have a willem burner and when burning my 27c0801's it stops at 99% and with an error
It's easier if you paste the exact text of the error.
Posted: Tue Feb 05, 2008 3:45 pm
by atari2600a
99%...you didn't leave the header in the ROM did you? It sounds like you're meeting the address limit of the ROM.
Posted: Wed Feb 06, 2008 11:58 pm
by Nerdy Nick
nope, I removed the header and the rom is the exact size it should be
I cant remeber of the top of my head but the error was something like:
error burning at 0x0000001.
Posted: Thu Feb 07, 2008 5:46 pm
by Senshu
To me it looks like the eprom wasn't empty.
Posted: Sat Feb 09, 2008 10:57 pm
by Nerdy Nick
I think i might have the wrong starfox rom, because when i run it in an emulator it works but it fails the checksum. I know i cant ask directly on the forum but if knows where i can get a good version of this rom PM me
Posted: Sun Feb 10, 2008 4:01 am
by Senshu
Checksum doesn't matter, really.
Posted: Sun Feb 10, 2008 4:10 am
by Nerdy Nick
Really?.. well then i really cant think of anything else im doing wrong