ouso1999 wrote:
i said at first that the port was separated or disentangled from the board or the trace , so i soldered it and it worked well for awhile and 2 weeks then , it stopped working.i don't know till now what happened and why it stopped working.
u asked 4 clearer images.can the previous image help u to know what's wrong?
is there a hardware piece that has to be changed?i'm ready to take this piece from another console to replace it.
If the connection were lifted like I think, no amount of re-soldering will ever do you any good. You need to check the trace for continuity like Memblers said and then redo the part that are no longer connecting with jumper wire or such.
u should know that when i touch the pins of this port,something happens looks like i pressed start,select,b button.have u understood me?
after that,is still there disorder or failing in the connection?
anyway,i'm gonna check it by the ohmmeter.
Well usually if the controller (when plugged in) does that behavior it means the clock line isnt working. But you made it sound like you were just poking around on the lines (dont do that btw its asking it to fry)
