USB Flash Programmer (FLProgLite)

Discuss hardware-related topics, such as development cartridges, CopyNES, PowerPak, EPROMs, or whatever.

Moderators: B00daW, Moderators

Post Reply
User avatar
FARID
Posts: 499
Joined: Wed Apr 07, 2010 1:14 am
Location: Iran
Contact:

USB Flash Programmer (FLProgLite)

Post by FARID »

With this programmer it is possible to programm about 100 different types of flash memory chips - about 200 by using the typical conversion rate used by manufacturers of programmers. During the design has been placed great emphasis on the construction of maximum simplicity of programming at the same time it convenient to use through the computer and the greatest possible number of supported systems. The entire system consists of a programming unit - programming and computer software. Is modeled on commercial structures such devices on the market today. The programmer is connected to the computer via the USB port. On the computer running the software that controls its work and providing the user interface. The programmer is powered entirely from the USB port, so there is no need to connect an additional power supply is undoubtedly a great advantage. With the programmer can also program new, clean FLASH memory chips and replace them, the original memory ROM cartridges for various older game consoles.

Image

Image

Download rev1.2

Source Page

**************************************
By the way where is the last topic about "USB Flash Programmer (FLProgLite)", Google has a copy of it.
tepples
Posts: 22345
Joined: Sun Sep 19, 2004 11:12 pm
Location: NE Indiana, USA (NTSC)
Contact:

Post by tepples »

The last topic was hidden because another admin told me that the author of the program had licensed it only to registered users of one specific forum. I have edited your links to point to the login page of that forum.
User avatar
FARID
Posts: 499
Joined: Wed Apr 07, 2010 1:14 am
Location: Iran
Contact:

Post by FARID »

OK, as you wish. But there is nothing inside of that forum :

Image
User avatar
keropi
Posts: 66
Joined: Fri Jul 13, 2012 2:06 am
Location: Greece

Re: USB Flash Programmer (FLProgLite)

Post by keropi »

yep, can't find the info either.... seems deleted or something
Asphyx
Posts: 25
Joined: Sun Dec 12, 2010 2:34 pm

Re: USB Flash Programmer (FLProgLite)

Post by Asphyx »

I can upload them for you. I even redesigned the pcb to use a 16AU atmega.
User avatar
keropi
Posts: 66
Joined: Fri Jul 13, 2012 2:06 am
Location: Greece

Re: USB Flash Programmer (FLProgLite)

Post by keropi »

when you have the time please do upload it Asphyx, TIA! :)
mk2525
Posts: 1
Joined: Mon May 21, 2012 10:58 am

Re: USB Flash Programmer (FLProgLite)

Post by mk2525 »

It was uploaded on another forum and licensed for registered users only not for redistribution. It was available for limited amount of time and intended for testing purposes only. That's why it's no longer available. Author received complaints about reliability and stability of this programmer so it's not recommended to build one, but new and greatly improved version is planned. You can contact author on flproglite.strefa.pl for more information, but there are other more reliable alternatives for this programmer available online.
Asphyx
Posts: 25
Joined: Sun Dec 12, 2010 2:34 pm

Re: USB Flash Programmer (FLProgLite)

Post by Asphyx »

...care to elaborate? :D
Post Reply